HDPE Pipes — 5 MPa (PE63) — ISO 4427 / DIN 8074
Premium Manufacturer & Supplier in the UAE
PE63 HDPE pipes — SDR 7.4 to SDR 33, PN 3.2–16, dn 16–400 mm.
Standards & Certifications
Overview
Product introduction and key characteristics
Crown Plastic Pipes / Fittings, a leading HDPE pipe manufacturer in the UAE, produces PE63 grade high-density polyethylene pipes to ISO 4427 / DIN 8074 / EN 12201 standards. Rated at 5 MPa with wall thicknesses spanning SDR 7.4 (PN16) to SDR 33 (PN3.2), these pipes serve municipal water distribution, agricultural irrigation, and underground infrastructure across the UAE. Manufactured from 100% virgin polyethylene with 2.5% carbon black for superior UV resistance at our ISO 9001:2015 certified Umm Al Quwain facility.
Features
Technical advantages and key benefits of this product range
- Produced from 100% virgin polyethylene for maximum reliability.
- Contains a minimum of 2.5% carbon black for superior UV resistance.
- Excellent design stress capabilities ranging from PE63 to PE100 material grades.
- Compliance with international standards including ISO 4427, DIN 8074, and EN 12201.
- Safe for potable water supplies and drinking water distribution.
- High design coefficient 'C' of no less than 1.25 for enhanced safety margins.
Applications
Ideal use cases and industries for this product
- Municipal water distribution and potable water supply networks.
- Agricultural irrigation systems, including drip tubing and drip irrigation.
- High-pressure gas network distribution and industrial piping.
- Underground infrastructure requiring trenchless (HDD) installation.
Pipe Specifications
Technical dimensions and parameters for all pipe sizes
5 MPa (PE63)
| Nominal Outside Diameter (dn) | Nominal wall thickness, e_n (for σ_s = 5 MPa) | |||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Series S 16 (SDR 33) | Pipe Series S 12.5 (SDR 26) | Pipe Series S 8.3 (SDR 17.6) | Pipe Series S 8 (SDR 17) | Pipe Series S 6.3 (SDR 13.6) | Pipe Series S 5 (SDR 11) | Pipe Series S 4 (SDR 9) | Pipe Series S 3.2 (SDR 7.4) | |
| PN 3.2 | PN 4 | PN 6 | PN 6.3 | PN 8 | PN 10 | PN 12.5 | PN 16 | |
| 16 | - | - | - | - | 2.3 | 2.3 | 2.3 | - |
| 20 | - | - | - | 2.3 | 2.3 | 2.3 | 2.8 | - |
| 25 | - | - | 2.3 | 2.3 | 2.3 | 2.8 | 3.5 | - |
| 32 | - | - | 2.3 | 2.3 | 2.4 | 2.9 | 3.6 | 4.4 |
| 40 | - | 2.3 | 2.3 | 2.4 | 3.0 | 3.7 | 4.5 | 5.5 |
| 50 | - | 2.3 | 2.9 | 3.0 | 3.7 | 4.6 | 5.6 | 6.9 |
| 63 | 2.3 | 2.5 | 3.6 | 3.8 | 4.7 | 5.8 | 7.1 | 8.6 |
| 75 | 2.3 | 2.9 | 4.3 | 4.5 | 5.6 | 6.8 | 8.4 | 10.3 |
| 90 | 2.8 | 3.5 | 5.1 | 5.4 | 6.7 | 8.2 | 10.1 | 12.3 |
| 110 | 3.4 | 4.2 | 6.3 | 6.6 | 8.1 | 10.0 | 12.3 | 15.1 |
| 125 | 3.9 | 4.8 | 7.1 | 7.4 | 9.2 | 11.4 | 14.0 | 17.1 |
| 140 | 4.3 | 5.4 | 8.0 | 8.3 | 10.3 | 12.7 | 15.7 | 19.2 |
| 160 | 4.9 | 6.2 | 9.1 | 9.5 | 11.8 | 14.6 | 17.9 | 21.9 |
| 180 | 5.5 | 6.9 | 10.2 | 10.7 | 13.3 | 16.4 | 20.1 | 24.6 |
| 200 | 6.2 | 7.7 | 11.4 | 11.9 | 14.7 | 18.2 | 22.4 | 27.4 |
| 225 | 6.9 | 8.6 | 12.8 | 13.4 | 16.6 | 20.5 | 25.2 | 30.8 |
| 250 | 7.7 | 9.6 | 14.2 | 14.8 | 18.4 | 22.7 | 27.9 | 34.2 |
| 280 | 8.6 | 10.7 | 15.9 | 16.6 | 20.6 | 25.4 | 31.3 | 38.3 |
| 315 | 9.7 | 12.1 | 17.9 | 18.7 | 23.2 | 28.6 | 35.2 | 43.1 |
| 355 | 10.9 | 13.6 | 20.1 | 21.1 | 26.1 | 32.2 | 39.7 | 48.5 |
| 400 | 12.3 | 15.3 | 22.7 | 23.7 | 29.4 | 36.3 | 44.7 | 54.7 |
Installation Guidelines
Best practices for optimal performance and longevity
Do's
- ✓Ensure butt-fusion welding is performed using correct temperatures for the specific PE grade.
- ✓Verify the SDR and PN ratings match the intended application's hydrostatic design stress.
- ✓Use pipes with sufficient carbon black content for long-term outdoor UV exposure.
- ✓Follow the MRS guidelines to ensure the pipe meets its 50-year design life at 20°C.
Don'ts
- ✗Do not use non-potable pipes for drinking water distribution.
- ✗Avoid exceeding the maximum allowable hydrostatic design stress specified for the material.
- ✗Do not install pipes that have deep scratches or physical damage exceeding standard tolerances.
- ✗Avoid using materials that do not conform to the required design coefficient 'C' for pressure safety.
Technical FAQs
Answers to common questions about this product
- Produced from 100% virgin polyethylene for maximum reliability.
- Contains a minimum of 2.5% carbon black for superior UV resistance.
- Excellent design stress capabilities ranging from PE63 to PE100 material grades.
- Compliance with international standards including ISO 4427, DIN 8074, and EN 12201.
- Safe for potable water supplies and drinking water distribution.
- High design coefficient 'C' of no less than 1.25 for enhanced safety margins.
- Ensure butt-fusion welding is performed using correct temperatures for the specific PE grade.
- Verify the SDR and PN ratings match the intended application's hydrostatic design stress.
- Use pipes with sufficient carbon black content for long-term outdoor UV exposure.
- Follow the MRS guidelines to ensure the pipe meets its 50-year design life at 20°C.
- Do not use non-potable pipes for drinking water distribution.
- Avoid exceeding the maximum allowable hydrostatic design stress specified for the material.
- Do not install pipes that have deep scratches or physical damage exceeding standard tolerances.
- Avoid using materials that do not conform to the required design coefficient 'C' for pressure safety.
Technical Documents
Access comprehensive technical catalogues, dimensional specifications, and compliance documentation for HDPE Pipes — 5 MPa (PE63) — ISO 4427 / DIN 8074.
Need assistance with HDPE Pipes — 5 MPa (PE63) — ISO 4427 / DIN 8074?
Our technical team is here to help you select the right products for your project.