HDPE Pipes — AUST STD 2698-1:1984 (Drip Tubing)
Premium Manufacturer & Supplier in the UAE
LLDPE drip tubing to Australian Standard 2698-1:1984.
Overview
Product introduction and key characteristics
Crown Plastic Pipes / Fittings manufactures LLDPE drip tubing to Australian Standard 2698-1:1984 for agricultural applications across the UAE and GCC. Available in coil sizes of 250 meters with working pressures of 3–4 bar, these pipes are perfect for large-scale drip irrigation systems. Produced at our Umm Al Quwain facility with ISO 9001:2015 certification.
Features
Technical advantages and key benefits of this product range
- Produced from 100% virgin polyethylene for maximum reliability.
- Contains a minimum of 2.5% carbon black for superior UV resistance.
- Excellent design stress capabilities ranging from PE63 to PE100 material grades.
- Compliance with international standards including ISO 4427, DIN 8074, and EN 12201.
- Safe for potable water supplies and drinking water distribution.
- High design coefficient 'C' of no less than 1.25 for enhanced safety margins.
Applications
Ideal use cases and industries for this product
- Municipal water distribution and potable water supply networks.
- Agricultural irrigation systems, including drip tubing and drip irrigation.
- High-pressure gas network distribution and industrial piping.
- Underground infrastructure requiring trenchless (HDD) installation.
Pipe Specifications
Technical dimensions and parameters for all pipe sizes
AUST STD 2698-1
| Ordering Code | Nominal Inside Diameter | Minimum Inside Diameter | Minimum Wall Thickness | Nominal Working Pressure | Coil Size Meters | ||||
|---|---|---|---|---|---|---|---|---|---|
| mm | in | mm | in | m.m | Psi | Bar | |||
| CPDP 15670D(112) | 0.50 | 13 | - | 12.7 | 0.047 | 1.2 | 44 | 3.0 | 250 mtrs. |
| CPDP 15670D (124) | 0.50 | 13 | - | 12.7 | 0.059 | 1.5 | 60 | 4.0 | 250 mtrs. |
| CPDP 18110D (107) | 0.62 | 16 | - | 15.8 | 0.047 | 1.2 | 44 | 3.0 | 250 mtrs. |
| CPDP 20900D (119) | 0.74 | 19 | - | 18.90 | 0.051 | 1.3 | 44 | 3.0 | 250 mtrs. |
| CPDP 23440D (132) | 1.00 | 25 | - | 25.20 | 0.059 | 1.5 | 44 | 3.0 | 250 mtrs. |
| CPDP 30020D (157) | 1.24 | 32 | - | 31.50 | 0.078 | 2.0 | 44 | 3.0 | 250 mtrs. |
Installation Guidelines
Best practices for optimal performance and longevity
Do's
- ✓Ensure butt-fusion welding is performed using correct temperatures for the specific PE grade.
- ✓Verify the SDR and PN ratings match the intended application's hydrostatic design stress.
- ✓Use pipes with sufficient carbon black content for long-term outdoor UV exposure.
- ✓Follow the MRS guidelines to ensure the pipe meets its 50-year design life at 20°C.
Don'ts
- ✗Do not use non-potable pipes for drinking water distribution.
- ✗Avoid exceeding the maximum allowable hydrostatic design stress specified for the material.
- ✗Do not install pipes that have deep scratches or physical damage exceeding standard tolerances.
- ✗Avoid using materials that do not conform to the required design coefficient 'C' for pressure safety.
Technical FAQs
Answers to common questions about this product
- Produced from 100% virgin polyethylene for maximum reliability.
- Contains a minimum of 2.5% carbon black for superior UV resistance.
- Excellent design stress capabilities ranging from PE63 to PE100 material grades.
- Compliance with international standards including ISO 4427, DIN 8074, and EN 12201.
- Safe for potable water supplies and drinking water distribution.
- High design coefficient 'C' of no less than 1.25 for enhanced safety margins.
- Ensure butt-fusion welding is performed using correct temperatures for the specific PE grade.
- Verify the SDR and PN ratings match the intended application's hydrostatic design stress.
- Use pipes with sufficient carbon black content for long-term outdoor UV exposure.
- Follow the MRS guidelines to ensure the pipe meets its 50-year design life at 20°C.
- Do not use non-potable pipes for drinking water distribution.
- Avoid exceeding the maximum allowable hydrostatic design stress specified for the material.
- Do not install pipes that have deep scratches or physical damage exceeding standard tolerances.
- Avoid using materials that do not conform to the required design coefficient 'C' for pressure safety.
Technical Documents
Access comprehensive technical catalogues, dimensional specifications, and compliance documentation for HDPE Pipes — AUST STD 2698-1:1984 (Drip Tubing).
Need assistance with HDPE Pipes — AUST STD 2698-1:1984 (Drip Tubing)?
Our technical team is here to help you select the right products for your project.